1,The machine is reasonable in structure, good rigidity, beautiful appearance,,convenient operation.
2,The main mechanical valve is a specia1 valve grinder, is divided in to two parts,,the mechanical commutation control, throttle control. Throttle control part and unloading function, can realize the station start and stop.
3,Grinding can be all kinds of plane and complex shaped surface, suitable for motor without grinding the feed, according to user needs with a permanent magnet sucker or electromagnetic sucker.
Model MY1224 | MY1230 | MY1232 | ||||
Bench | Max.work piece to be Ground(LXWXH) | m | 600*300 | 700*300 | 800*320 | |
Maximum travel of table(L X W) | m | 640*320 | 760*370 | 860*380 | ||
Table maximum cutting area(LX W) | m | 640*320 | 760*370 | 860*380 | ||
Number of T-Slot | mm | 1x14 | 1x14 | 1x14 | ||
Tho grinding head | Distance from Table Surface To Spindle Center | mm | 490 | 540 | 540 | |
Wheel Size( diam X width X bore) | mm | Φ300*30*φ75 | Φ300x30xφ75 | Φ335x30xφ127 | ||
Spindle speeds (50HZ) | r/m | 1440 | 1400 | 1400 | ||
The amount of feed | Table longitudinal (left and right) speed (step less) | m/min | 3--20 | 5-25 | 5--25 | |
Table horizontal (before and after) the amount of feed | Continuous (variable speed) | mm/min | 150 | 150 | 150 | |
Intermittent (step less) | mm | 0-5 | 0-5 | 0-5 | ||
The hand wheel rotatos | mm | 4 | 4 | 4 | ||
Hand wheel each grid | mm | 0.02 | 0.02 | 0.02 | ||
Vertical (up and down) feed | The hand wheel rotates | mm | 2 | 2 | 2 | |
Hand wheel each grid | mm | 0.01 | 0.01 | 0.01 | ||
Motor power | Spindle motor | kw | 1.5 | 1.5 | 1.5 | |
Cooling motor | w | 40 | 40 | 40 | ||
Reversing feeder | hydraulic motor | kw | 1.5 | 1.5 | 1.5 | |
Working Pressure | Mpa | 3 | 3 | 3 | ||
Fuel tank capacity | L | 80 | 80 | 80 | ||
The Maximum flow | L/min | 18 | 18 | 18 | ||
working precision | The machined surface of the base of parallelism | mm | 300/0.004 | 300/0.004 | 300/0.004 | |
Surface Roughness | μm | Ra0.32 | Ra0.32 | Ra0.32 | ||
Weight of machine | Net | T | 1.5 | 2.1 | 2.5 | |
Cross | T | 1.65 | 2.35 | 2.75 | ||
Packing size (L x W x H) | mm | 1950x1700x2030 | 1950x1700x2030 | 2000x1800x2030 |
number: date:
name | Qt | name | Qt |
surface grinder | 1 | puller for adaptor | 1 |
tool box | 1 | grinding wheel | 1 |
screwdriver | 1 | wheel dresser | 1 |
cross screwdriver | 1 | flange | 1 |
open-end wrench 12 x 14 | 1 | balancing shaft | 1 |
open-end wrench 17 x 19 | 1 | balancing stand | 1 |
open-end wrench 19 × 22 | 1 | drain pipe | 1 |
inner hexagon spanner 3 | 1 | water inlet pipe | 1 |
inner hexagon spanner 4 | 1 | foot-screw | 3 |
inner hexagon spanner 5 | 1 | machine cushion | 3 |
inner hexagon spanner 6 | 1 | permanent magnetic chuck | 1 |
inner hexagon spanner 8 | 1 | diamond pen | 1 |
inner hexagon spanner 10 | 1 | water cooling system | 1 |
flange wrench | 1 |